Car processor BT/USB/FM receiver
Powerful built-in D-class amplifier.
Maximum output power: 4×141W
Nominal output power (with THD less than 1%): 4×71W
Minimum speaker impedance: 4 Ohms
USB connector with charging current: up to 1.2A
Reading audio formats: Hi-res FLAC (24 bit/48kHz), MP3, WAV, APE, AAC
RCA outputs: 3 pairs (6 channels)
Maximum amplitude of the RCA output signal: up to 4 volts
PLATFORM: Ai-DSP
Per-channel time correction of the sound field (Time Alignment)
31-band parametric equalizer
6-band crossover (6-48 dB per octave):
1-4 channels: HPF (High-Pass Filter) / LPF (Low-Pass Filter): 20 Hz – 12.5 kHz / Disabled
5-6 channels: HPF (High Pass Filter) / LPF (Low Pass Filter): 10 Hz – 800 Hz / Disabled
Compatible with iOS and Android application
Built-in Bluetooth module (A2DP)
RGB backlight of the front panel (16 million colors)
D-SWC (training resistive buttons on the steering wheel without an external adapter)
Remote control: included
ATTENTION!
The power wires must be connected DIRECTLY TO THE CORRESPONDING BATTERY TERMINALS, using a copper cable with a cross-section of at least 4 mm (12GA)!
Connection to the standard wiring or to the standard ISO connector is NOT ALLOWED!
EAN: 4680136866105